Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the car stereo of an Audi a4

Model: Audi A4 B7 - Years 2004-2008
Part: Car stereo

How to disassemble the original car stereo of an Audi A4? Let's see carefully in this video how to perform the disassembly following the video. We use the original or aftermarket metal dongles to disassemble the car stereo. We insert the keys in the slots placed on the plastic covering of the stereo; we pull the stereo towards us as in the video, take out the car radio, paying attention to the various wiring of the same (disconnect the power supply terminals and the antenna cable). Finally we reassemble the original car radio or one of a generic brand with a special adapter for the input and for the connection of the terminals.

Posted on 7 February 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the car stereo on Audi A4 B7
How to replace the car stereo on Audi A4 B7
Audi A4 (2004-2008 / B7) Today we will see how to disassemble and replace the original car stereo with the Bluetooth one on an Audi A4 B7, in simple and quick steps. First of…
Remove the Non-Working Car Stereo (Not Turning On)
Remove the Non-Working Car Stereo (Not Turning On)
Audi A4 (2000-2004 / B6) First, you need to remove the car stereo from its housing. To do this, use special release tools that you insert into the designated holes located ab…
How to disassemble the Audi A4 stock radio
How to disassemble the Audi A4 stock radio
Audi A4 (2000-2004 / B6) Below we will see the main instructions on how to disassemble and replace the standard car radio, including the radio cassette, of the Audi A4. First…

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos