Do it yourself
Frequently asked questions about cars and motorcycles

Remove the Non-Working Car Stereo (Not Turning On)

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Car stereo

See other generations:
Video tutorial

First, you need to remove the car stereo from its housing. To do this, use special release tools that you insert into the designated holes located above and below the buttons in the four corners.

If you only have two tools, proceed one side at a time. Insert the two tools into the holes on the right, and once the stereo is released, pull that side towards you. Next, insert the two tools into the holes on the left and pull towards you to extract the stereo.

Disconnect the antenna cable, power cable, and speaker wires (simply press the side clip and pull outward). Finally, remove the jumper stuck behind the stereo as shown in the images.

The car on which this maintenance operation is performed is an Audi A4.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Audi A4 (2004-2008 / B7) Using the appropriate four special tools that fit into the slots above and below the car radio to release the retaining springs, pull out the complet…
Audi A4 (2004-2008 / B7) Do you want to remove the climate control unit from the A4? Let's see how to take it out from the center console. First, remove the radio using the a…
Audi A4 (2004-2008 / B7) Today, you will see a very simple tutorial: removing the car radio from the center console of an Audi A4. The first step to remove the car radio from…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos