Do it yourself
Frequently asked questions about cars and motorcycles

How to install the rear camera on the Audi A3?

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Accessory kit

See other generations:
Video tutorial

In this guide, you will find instructions for installing the rear camera on the Audi A3. First, open the tailgate and begin removing the plastic interior trim by unscrewing the securing screws. Then, position the camera on the tailgate, routing the wiring to the front (to the fuse box), as shown in the video.

At this point, install the display on the central instrument panel, ensuring proper wiring for parking manoeuvres.


Posted on 28 September 2026 by ScegliAuto


Related tutorials

Audi A3 (2003-2013 / 8P, MK 2) Let's see how to install the rear camera on an Audi A3 8P: the path goes from the tailgate to the rubber channel, to the ceiling, to the side pillar,…
Audi A3 (2012-2019 / MK 3, 8V) A reversing camera has become an essential accessory on our vehicles, and if an older car doesn't have one, you can install it yourself. Here's how o…
Audi A3 (2012-2019 / MK 3, 8V) In the Audi A3, all fuses are contained within the designated fuse boxes installed in the vehicle: in this type of car, you can find two boxes. The f…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • A3 2012-2019 - Where is the usb port in the Audi A3? Read answer

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos