|
Do it yourself
| |||
| ||||
How to install the rear camera on an Audi A3 8P
Model: Audi A3
MK 2, 8P
- Years 2003-2013
Let's see how to install the rear camera on an Audi A3 8P: the path goes from the tailgate to the rubber channel, to the ceiling, to the side pillar, to the interior under the carpet, behind the radio. The rear camera is powered by the positive with PIN 1 of the reverse light connector (blue/red wire - first on the left); the negative ground on the body (brown wire) for power we will use a current tap. The camera physically must be inserted into the hole of the plastic plate of the tailgate, and fixed inside with bolts. We will pass the cable through the hole. Connect the power connector to the camera, the video cable to the main unit and secure all the cables along the path. The result is a flicker-free operation, and a perfect integration of the rear camera.
Posted on 10 November 2025 by ScegliAuto
Video tutorial
Related tutorials
Audi A3
(2012-2019 /
8V, MK 3)
The reverse camera has now become an essential accessory on our cars, and if an older car doesn't have it, we can install it ourselves. Let's see how…
Audi A3
(2012-2019 /
8V, MK 3)
In this video we can see how to replace the reverse light bulb on an Audi A3 8V: on this model, the headlight is divided into two halves, one part re…
Audi A3
(2012-2019 /
8V, MK 3)
To replace the remote control battery of the Audi A3, lift the cover on the back of the remote, located just below the manufacturer's logo. By removi…
Other guides you may be interested in
|
Frequently Asked QuestionsWhere is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 1.029
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
