Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Application of Window Tint Films

Model: Audi A4 B8 - Years 2007-2016
Part: Body

The first thing to consider is that the films should be shaped externally and then adhered from the inside: during the shaping process, the film must be placed on the outside of the glass with the protective film also facing outward. First, thoroughly clean the glass both outside and inside with the appropriate cleaner. Apply the film externally as indicated and shape it with the appropriate spatula; cut out the perfect shape of the glass, remove the protective film, generously wet the inside of the glass with the application liquid, and adhere the film while pushing out all the liquid with the appropriate spatula, avoiding the formation of air bubbles.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to restore automatic window operation on an Audi A4
How to restore automatic window operation on an Audi A4
Audi A4 (2007-2016 / B8) If your Audi A4 has been standing still for a long time for some reason, perhaps with the battery disconnected (for the lockdown, for example), when …
Replacement windshield wipers Audi A4 Avant
Replacement windshield wipers Audi A4 Avant
Audi A4 (2004-2008 / B7) In this video we will see how to replace the front wiper blades of the Audi A4 Avant B8. First we go to raise our old brushes: now (depending on the …
How to top up the windshield washer fluid in the Audi A4
How to top up the windshield washer fluid in the Audi A4
Audi A4 (2014-2024 / B9) Today we will explain how to top up the windshield washer fluid of the 2018 Audi A4. The windshield washer fluid tank, unlike other vehicles, is not …

How to Replace the Fog Light Bulb on a Renault Scenic

Let's see how to replace the fog light bulb on a Renault Scenic. Lift the car onto a column lift and secure it. Prepare to remove the plastic cover at the bottom of the engine using a suitable socket wrench, reaching the side fog light located in the bumper. After removing the bulb holder, take out the damaged bulb and fit a new one (same size and voltage). Refit the plastic cover under the car's bumper with the attached pins. Test the correct operation of the lights.

Watch the video!


by ScegliAuto

More videos