Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of a Ford B Max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Key

Replacing the remote key battery of the Ford B Max is very simple, and the same procedure can be repeated for other models from the same manufacturer that share the same key design; start by removing the back casing of the key, which bears the manufacturer's emblem: on the upper edges of the key, there are two elements that must be pressed simultaneously to release the cover; at this point, use the tip of a screwdriver to pry off and extract the remote section that houses the buttons to access the battery compartment and replace it.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of a Ford B-max
How to Replace the Remote Battery of a Ford B-max
Ford B Max (2012-2018 / MK 1) Today, in this video tutorial, you will learn how to disassemble and replace the battery of the key remote for a Ford B-max. First, take the remote i…
How to replace the remote battery on a Ford B-MAX?
How to replace the remote battery on a Ford B-MAX?
Ford B Max (2012-2018 / MK 1) As shown in this tutorial, replacing the remote battery on a Ford B-MAX is an extremely simple and quick operation. You will need a small flathead sc…
How to Replace the Fan Resistor on a Ford B-Max
How to Replace the Fan Resistor on a Ford B-Max
Ford B Max (2012-2018 / MK 1) Before you begin, open the front passenger door of your Ford B-Max. Start by removing the panel located at the bottom of the centre tunnel. Next, dis…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos