Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of a Ford B-max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Key

Today, in this video tutorial, you will learn how to disassemble and replace the battery of the key remote for a Ford B-max. First, take the remote in your hand and open it by pressing the two buttons: this will open the back cover of the key. Now, remove the key and, using a very thin lever or a flat screwdriver, pry the remote apart as shown in the video; at this point, access the battery, remove it, and replace it with a new one (of the correct type, usually a 2032). Once replaced and inserted in the correct orientation, reassemble everything!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fan Resistor on a Ford B-Max
How to Replace the Fan Resistor on a Ford B-Max
Ford B Max (2012-2018 / MK 1) Before you begin, open the front passenger door of your Ford B-Max. Start by removing the panel located at the bottom of the centre tunnel. Next, dis…
How to Reset the Tyre Pressure Light on the Ford B-Max
How to Reset the Tyre Pressure Light on the Ford B-Max
Ford B Max (2012-2018 / MK 1) In today's video, see how to reset the tyre pressure light on the Ford B-Max. First, check the tyre pressures and, if necessary, adjust them to the m…
How to replace the remote battery on a Ford B-MAX?
How to replace the remote battery on a Ford B-MAX?
Ford B Max (2012-2018 / MK 1) As shown in this tutorial, replacing the remote battery on a Ford B-MAX is an extremely simple and quick operation. You will need a small flathead sc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos