Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in a Ford B-Max 1.5 TDCI Using a Memory Saver

Model: Ford B Max MK 1 - Years 2012-2018
Part: Battery

See how to replace the battery in a Ford B-Max 1.5 TDCI using a memory saver to avoid losing data and settings. To work effectively, remove the air filter (there are 4 screws), then take off the mounting bracket. Now connect the memory saver by attaching the negative and positive leads. This accessory can be very useful throughout the life of the vehicle. It can be found on all e-commerce platforms at varying prices, starting from £40.00 and up, to professional devices that cost considerably more. Choose according to your needs and budget. Now that the memory saver is connected, remove the negative terminal of the battery to be changed, then the protective cover, followed by the positive terminal. The vehicle remains powered. Pull out the old battery. Install the new one by connecting the positive first, then the negative. You can remove the memory saver. Refit the air filter. You are done without losing any settings as the vehicle has always been powered.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials
…
How to replace the remote battery on a Ford B-MAX?
How to replace the remote battery on a Ford B-MAX?
Ford B Max (2012-2018 / MK 1) As shown in this tutorial, replacing the remote battery on a Ford B-MAX is an extremely simple and quick operation. You will need a small flathead sc…
How to Replace the Key Battery of a Ford B Max
How to Replace the Key Battery of a Ford B Max
Ford B Max (2012-2018 / MK 1) Replacing the remote key battery of the Ford B Max is very simple, and the same procedure can be repeated for other models from the same manufacturer…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos