Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Ford Ranger

Model: Ford Ranger - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Battery

See other generations:
Video tutorial

To replace the battery in a Ford Ranger T6, open the bonnet and locate the battery in the engine bay. Remove any protective covers and ensure the vehicle is completely off. Loosen the negative terminal and disconnect it, then proceed with the positive terminal.

Unscrew the bracket or holding plate that secures the battery in place.

Carefully remove the battery, considering its weight. Place the new battery in the same housing, ensuring the orientation of the terminals is correct, and secure it again with the bracket.

Connect the positive terminal first, then the negative, tightening the connections well. Refit the covers and turn on the ignition to check that everything works correctly.


Posted on 8 November 2026 by ScegliAuto


Related tutorials

How to Change the Key Remote Battery on a Ford Ranger
How to Change the Key Remote Battery on a Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) To change the battery of the key remote for a Ford Ranger, first press the unlock button and extract the emergency mechanical key. In the gap left, i…
How to Change the Key Battery of the Ford Ranger
How to Change the Key Battery of the Ford Ranger
Ford Ranger (1998-2011 / MK 3) In this article, you will see how to replace the battery of the Ford Ranger key. For this operation, you will need a CR2032 battery and a small flath…
How to replace the battery of the Ford Ranger key
How to replace the battery of the Ford Ranger key
Ford Ranger (2022-2026 / RA, P703) If you do not know how to properly replace the battery in the key of your latest model Ford Ranger, do not worry because in the following guide you w…

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos