Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset Audi A4 service warning light

Model: Audi A4 B6 - Years 2000-2004
Part: Service warning light

What to do when the service warning light appears on an Audi A4? Let's see how it resets. We enter the car body, turn on the instrument panel with a special key to check the warning light. We turn off the instrument panel, press the button (fixedly) placed above the instrument panel until the writing of the reset to be done appears. Select the desired maintenance with the right button and press until the word Service appears. Turn off the instrument panel once the service has been reset and turn it on again to check the reset setting. Carry out changes to the car service with the vehicle stopped and switched off.

Posted on 5 August 2020 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service warning light on an Audi A4
How to reset the service warning light on an Audi A4
Audi A4 (2004-2008 / B7) Resetting the service warning light on an Audi A4. Very simple operation, we enter the car body, turn on the instrument panel with the appropriate ke…
How to reset the service in the Audi A4?
How to reset the service in the Audi A4?
Audi A4 (2007-2016 / B8) Resetting the service in the Audi A4, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, we must have comp…
How to reset the service light on the Audi A4 B7?
How to reset the service light on the Audi A4 B7?
Audi A4 (2004-2008 / B7) In the Audi A4 B7, which was produced between 2004 and 2008, resetting the service light is very simple and only takes a few minutes. The same proced…

Other guides you may be interested in

Tips on How to Change the Glow Plugs on 1.3 MJT Engines

The 1.3 CDTI engine is used in many models from Fiat, Lancia, Opel, and Suzuki, making glow plug wear a common issue. The glow plugs are located at the front of the engine, just in front of the rocker cover. Simply remove the engine cover to locate them. A quick functionality check can be done by disconnecting the connector and gently touching the glow plug with an electric wire connected to the positive terminal of the battery: if a spark occurs, the glow plug is fine. A problem that may arise during replacement is that the glow plug may not unscrew. It is advisable to spray some penetrating oil and let it sit overnight before unscrewing it with an 8 mm socket. Before installing the new one, apply some special grease and do not exceed the torque specification.

Watch the video!


by ScegliAuto

More videos