Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on an Audi A4?

Model: Audi A4 B6 - Years 2000-2004
Part: Service warning light

You can completely turn off the Service light that appears on the instrument panel of the Audi A4 by holding down the button with the wrench icon located on the right side of the instrument panel. While continuing to hold this button, you can insert the ignition key into the corresponding ignition switch so that you can turn on the instrument panel. Once the panel is activated, you can hold the button down for a few seconds until the light resets; after the reset is complete, you can release the button and turn off the panel.

Posted on 29 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Audi A4?
How to Reset the Service Light on an Audi A4?
Audi A4 (2007-2016 / B8) To reset the Service light on an Audi A4, turn on the ignition to access the menu on the central display of the dashboard. Use the controls on the ce…
How do you reset the Service light on the Audi A4?
How do you reset the Service light on the Audi A4?
Audi A4 (2000-2004 / B6) To reset the Service light that appears on the instrument panel of the Audi A4, you need to press and hold the button with the icon of the English ke…
How to reset the Service light on the Audi A4?
How to reset the Service light on the Audi A4?
Audi A4 (2007-2016 / B8) From the instrument cluster of the Audi A4, you can clear the Service light that appears on the display by turning on the instrument cluster, allowin…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos