Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Engine Mounts

Model: Audi 80 B4 - Years 1991-1995
Part: Engine mount

To access the mount to be replaced, remove the air box after deactivating the ECU. Remove the nuts from the front wheel and lift the vehicle, securing it. Unscrew the bolts and remove the wheel. Install an appropriate support under the engine to prevent movement during the removal of the mounts. Remove the plastic underbody protection and locate the mounts. Begin by unscrewing the four nuts that secure the mount and the fixing nuts of the vibrostop using a ratchet and a spanner. Once the faulty part is removed, position the new replacement and screw in the previously removed bolts. For a more effective job, it is advisable to lubricate them before installation.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Audi 80 B3?
Audi 80 (1986-1991 / B3) In this new guide dedicated to all owners of an Audi 80 B3, we will discover together where the box containing the various fuses of the car is locate…
Where are the fuses of the Audi 80 located?
Where are the fuses of the Audi 80 located?
Audi 80 (1986-1991 / B3) The fuses of the Audi 80 are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of car it will be possible to …
Fuse diagram of an Audi 80
Fuse diagram of an Audi 80
Audi 80 (1991-1995 / B4) We can see through this very useful video tutorial today all the fuse diagrams inside the legendary Audi 80, B4 model in production from 1991 to 1996…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos