Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper and Wing on Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Front bumper

As is often the case, removing the car's bumper takes time but is relatively straightforward. To do this, you need to unscrew all the bolts securing it from above, both on the sides and in the centre, and do the same underneath (lift the car if you struggle to get under the bumper). Once done, to completely free the wing, you need to move the wheel arch liner and unscrew the hidden bolts behind it. Remove the wheel to gain more working space. Proceed in reverse order for reassembly, remembering all the screws shown in the video.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper of the Audi A3
Removing the Front Bumper of the Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Today's guide shows the steps to remove and replace the front bumper of the Audi A3. First, open the bonnet and start unscrewing the plastic screws f…
Removing the Audi A3 Front Bumper Grille
Removing the Audi A3 Front Bumper Grille
Audi A3 (2003-2013 / MK 2, 8P) Remove the central grille of the front bumper on an Audi A3 if damaged. Unscrew the screws above, to the side, and below the bumper. Using a plastic …
How to replace the front headlight bulb of the Audi A3
How to replace the front headlight bulb of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today we will explain how to replace the headlight bulb of the right front headlight of an Audi A3 model 8P car. Before proceeding with the replaceme…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos