Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key battery of an Audi A3 Sportback.

Model: Audi A3 Sportback MK 3 - Years 2012-2019
Part: Key

Replacing the remote control battery of an Audi A3 Sportback is a simple operation; let's see how to do it. We remove the plastic cover placed under the Audi logo by levering it with a screwdriver, as shown at 0:25. Now remove, with the help of the screwdriver, the battery. Let's replace it with the new CR 2032 battery, pressing lightly to make sure it has entered the housing correctly. At this point it will be sufficient to reinsert the plastic cover, making it adhere with a slight pressure and we will be able to use our remote control again.

Posted on 14 December 2021 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 key remote control battery replacement
Audi A3 key remote control battery replacement
Audi A3 Sportback (2012-2019 / MK 3) In this video tutorial we will see how to remove and replace the key remote control battery on an Audi A3 Sportback. First we take our remote control…
How to open the remote control and replace the battery of the A3 - A4 - A5 - A6
How to open the remote control and replace the battery of the A3 - A4 - A5 - A6
Audi A3 Sportback (2012-2019 / MK 3) Let's find out the steps on how to remove the key remote control and how to replace the battery of the Audi A3 Sportback, but also of the A4, A5 and …
Replacement of the air vents of the Audi A3 Sportback
Replacement of the air vents of the Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) We see in this guide the instructions that will allow us to disassemble and replace the air conditioning vents or diffusers of the Audi A3 Sportback.…

Other guides you may be interested in

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos