Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Battery

Replacing the battery in the Audi A3 is very simple, let's see how to proceed in this tutorial. For this operation, in addition of course to a suitable replacement battery, we will need a 10mm socket wrench. First of all, make sure that the key is not inserted, then open the bonnet and disconnect both poles, loosening the two nuts with the 10 spanner and always starting with the negative one. Once this is done, unscrew the bolt of the fixing bracket on the left, extract the old battery and mount the new one following the reverse procedure.

Posted on 26 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How do i replace the battery in the Audi A3?
How do i replace the battery in the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To be able to replace the Audi A3 battery, you need to open the hood and access the components below: in the central part of the engine compartment, …
How do you reset the low battery indicator on the Audi A3 key?
How do you reset the low battery indicator on the Audi A3 key?
Audi A3 (2012-2019 / 8V, MK 3) When the low battery symbol appears on the instrument panel of the Audi A3, it means that the key battery needs to be replaced. By replacing the batt…
How to replace the battery of the Audi A3
How to replace the battery of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today's guide will show us how to disassemble and replace the battery of the Audi A3, following the instructions below. First, we open the car's engi…

Other guides you may be interested in

How to Replace the Rear Wheel Bearing on Peugeot 407

How to remove a rear wheel bearing along with all associated parts on a Peugeot 407? Position your car on a column lift, loosen the bolts with a socket wrench and raise it to a comfortable height. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a socket to loosen the caliper bolt. Now remove the caliper bracket and unscrew the bolts on the brake disc, pulling the disc towards you to slide it off the wheel hub. Completely remove the wheel hub from the car's arm and extract the worn bearing. Using a pressing tool, fit the new bearing. Before reassembling everything, clean all dirt and debris from the disassembled parts with brushes and lubricate the components. Refit the brake disc with all associated bolts.

Watch the video!


by ScegliAuto

More videos