Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A1
  6. : How do I set the automatic closing of the rear view mirrors on the Audi A1?

Audi A1 - Video tutorial

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Outside rearview mirror
Operation: How do I set the automatic closing of the rear view mirrors on the Audi A1?

In order to set the automatic closing of the Audi A1 rear-view mirrors, you must press and hold the CAR and SETUP buttons located on the car's central tunnel at the same time. In this way it will be possible to access a menu, in which you will move with the commands always positioned on the central tunnel: it will be necessary to select the item "car" and then "cardevicelist". A further screen will open, where it will be necessary to check the "mirrors" box; then you will need to go back to the initial screen by selecting "Central locking" and then move "Fold mirrors" from OFF to ON.


Posted on 24 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos