Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : Intake manifold gasket replacement

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Engine
Operation: Intake manifold gasket replacement

The intake manifold gasket is made up of six pieces: four single rings that must be positioned in correspondence with the individual ducts and the manifold and two other elements each made up of two joined rings. Once the individual gaskets have been inserted into their respective seats, position the manifold and tighten the relative fixing pins using a torque wrench, thus ensuring uniform adherence and guaranteeing perfect sealing of the gaskets. In this way, fluid pressure losses along the intake duct will be avoided, ensuring better engine performance.


Posted on 3 August 2023 by ScegliAuto

    Frequently Asked Questions

    • A3 2012-2019 - What is the cost of changing the engine on the Audi A3? Read Answer
    • A3 2012-2019 - What problems can the Audi A3 heat exchanger have? Read Answer
    • A3 2020-2027 - Where is the engine speed sensor located on the Audi A3? Read Answer
    • A3 2012-2019 - When does the engine light come on in the Audi A3? Read Answer
    • A3 2003-2013 - What does the engine light indicate on the Audi A3? Read Answer
    • A3 2003-2013 - How much does it cost to change the Audi A3's hydraulic lifters? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos