Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I remove the door panel of the Audi A3?

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Door trim panel

In order to replace the door panel of the Audi A3, you need to pry with a thin object, so that the panel in the center of the door, under which the loudspeaker is located, can be detached. After this panel has been removed, it will be possible to unscrew the screws underneath in order to free the panel: it will now have to be detached from the door, starting to pry from the lower part. Then you will have to disconnect the connectors placed inside so that you can then connect the new panel to them; after connection, the new panel must be fixed with the appropriate screws.

Posted on 12 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the door panel of the Audi A3?
How do you remove the door panel of the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) The Audi A3 door panel is removed by removing the plastic cover located next to the window control panel. Under this cover there will be one of the s…
How do you remove the door panel of the Audi A3?
How do you remove the door panel of the Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) In order to remove the door panel of the Audi A3, you have to remove the plastic panel located next to the handrail and above the window control pane…
How do I remove the glove compartment of the Audi A3?
How do I remove the glove compartment of the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) In order to remove the glove compartment of the Audi A3, you need to loosen the two bolts located immediately under the drawer and then open the draw…

How to Replace the Rear Wheel Bearing on Peugeot 407

How to remove a rear wheel bearing along with all associated parts on a Peugeot 407? Position your car on a column lift, loosen the bolts with a socket wrench and raise it to a comfortable height. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a socket to loosen the caliper bolt. Now remove the caliper bracket and unscrew the bolts on the brake disc, pulling the disc towards you to slide it off the wheel hub. Completely remove the wheel hub from the car's arm and extract the worn bearing. Using a pressing tool, fit the new bearing. Before reassembling everything, clean all dirt and debris from the disassembled parts with brushes and lubricate the components. Refit the brake disc with all associated bolts.

Watch the video!


by ScegliAuto

More videos