Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Transmission Oil Change Instructions

Model: Audi A4 B6 - Years 2000-2004
Part: Transmission fluid

To perform the transmission oil change, lift the vehicle on a hydraulic lift. Locate the drain plug (located underneath) and the fill plug (located higher up): both must be removed to completely drain the oil from the transmission. Once the draining is complete, screw the drain plug back in and add new oil (SAE 75 W 90) through the fill hole using a syringe: the level is reached when the oil starts to overflow (approximately two quarts of oil are needed), at which point screw the plug back in.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Transmission Oil on an Audi A4
How to Change Transmission Oil on an Audi A4
Audi A4 (2000-2004 / B6) It is advisable to change the transmission oil every certain miles; let's see how to change it on an Audi A4. Position your car on a lift and raise i…
Guide to replacing the automatic transmission oil of the Audi A4
Guide to replacing the automatic transmission oil of the Audi A4
Audi A4 (2014-2024 / B9) In this guide, we will see the main instructions useful for replacing the automatic transmission oil of the Audi A4. First, we lift the vehicle and s…
Audi A4 automatic gearbox oil change
Audi A4 automatic gearbox oil change
Audi A4 (2014-2024 / B9) In this video tutorial we will see the steps that will allow us to replace the automatic gearbox oil of the Audi A4, following the instructions below…

How to Replace a Damaged Wheel on a Nissan Qashqai

Learn how to replace a damaged wheel on a Nissan Qashqai: open the boot and take the wheel removal kit which includes: jack, jack lever, screwdriver, wheel nut key (if present), telescopic wrench, spare wheel. Position the jack under the jacking point of the vehicle (under the stiffest part of the chassis), lift the car slightly and loosen the wheel nuts. Raise the car with the jack lever and unscrew the nuts, then remove the damaged wheel. Fit the spare wheel onto the hub with the respective nuts and lower the car to the ground. Always remember to store the removal kit back in the boot.

Watch the video!


by ScegliAuto

More videos