Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Transmission Oil on an Audi A4

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Transmission fluid

See other generations:
Video tutorial

It is advisable to change the transmission oil every certain miles; let's see how to change it on an Audi A4. Position your car on a lift and raise it to a comfortable height for disassembly. To change the transmission oil, you need to unscrew the bolts located underneath it with a socket wrench. (as shown in the video) Once the bolts are removed, let the fluid drain into a container.

Prepare to screw all the bolts back onto the transmission with the socket wrench, then, top off with the appropriate transmission fluid. Test the proper functioning of the transmission.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

Guide to replacing the automatic transmission oil of the Audi A4
Guide to replacing the automatic transmission oil of the Audi A4
Audi A4 (2014-2024 / B9) In this guide, we will see the main instructions useful for replacing the automatic transmission oil of the Audi A4. First, we lift the vehicle and s…
Automatic Transmission Fluid Change for Audi A4
Automatic Transmission Fluid Change for Audi A4
Audi A4 (2014-2024 / B9) In this video tutorial, follow the steps to change the automatic transmission fluid in your Audi A4, as outlined below. First, lift the vehicle and s…
Replacing the Front Axle Shaft on the Audi A4 B7
Replacing the Front Axle Shaft on the Audi A4 B7
Audi A4 (2004-2008 / B7) In this video, see how to remove and replace the front axle shaft on the Audi A4 B7, following the instructions below. First, lift the vehicle and st…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos