Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Axle Shaft on the Audi A4 B7

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Axle shaft

See other generations:
Video tutorial

In this video, see how to remove and replace the front axle shaft on the Audi A4 B7, following the instructions below. First, lift the vehicle and start by removing the front wheel; then, unscrew all the bolts at the base of the axle shaft using a Torx wrench, as shown in the video.

Next, disconnect the axle shaft joint from the wheel bearing to remove it and replace it with the new one; then, reassemble the new front axle shaft by reversing the disassembly procedure!


Updated on 6 June 2026 by ScegliAuto


Related tutorials

Replacing the CV Joint
Replacing the CV Joint
Audi A4 (2000-2004 / B6) To replace the CV joint, you need to remove the axle: before lifting the vehicle, unscrew the central bolt that secures the axle to the hub. Then lif…
Replacing the CV Joint on the Wheel Side
Replacing the CV Joint on the Wheel Side
Audi A4 (2000-2004 / B6) Lift the vehicle on appropriate jack stands and remove the front wheel where the repair will be made. Then, unscrew the central fastening bolt of the…
Front Axle Replacement
Front Axle Replacement
Audi A4 (2000-2004 / B6) Remove the central bolt located on the affected wheel for this procedure, as well as the bolts that secure the wheel so you can take it off. You will…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos