Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A4
    4. : Replacement of stabilizer bar rubbers

Audi A4 - Video tutorial

Model: Audi A4 B6 - Years 2000-2004
Part: Bearing
Operation: Replacement of stabilizer bar rubbers

Raise the car on a lift and remove the front wheels (pay attention to any anti-theft pin); then disconnect the connecting rods from the oscillating arms of the suspensions in order to free the stabilizer bar and remove the relative fixing brackets inside which the rubber pads are housed; once the brackets have been removed, remove the old rubber pads and insert the new ones after having lubricated them with grease (it is also possible to use silicone ones that are much more resistant than rubber ones); finally proceed backwards to refit the brackets and connecting rods.


Posted on 16 August 2023 by ScegliAuto

    Frequently Asked Questions

    • A4 2007-2016 - How much does it cost to replace a wheel bearing in the Audi A4? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos