Do it yourself
| ||||
|
Audi A6 - Video tutorial
Model: Audi A6
C5, MK 2
- Years 1997-2004 To be able to remove the door panel from the Audi A6 you have to go and detach the molding which is located along the entire length of the door, in its upper part: in this way it will be possible to unscrew all the screws located underneath it. Once these screws have been loosened, it will be possible to unscrew the lateral screw in the upper part of the panel, so that it can be completely detached, after having disconnected all the internal connectors. In this way it will be possible to connect the new panel, fixing it with all the previously removed screws.
Posted on 12 April 2023 by ScegliAuto
Other guides that may interest you |
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.035
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |