Do it yourself
Frequently asked questions about cars and motorcycles

Tire Pressure Check

Model: Audi A4 B8 - Years 2007-2016
Part: Checks and maintenance

Check the tire pressure regularly, not just before a long trip. It should become a routine habit. The correct tire pressure affects many factors, from tire grip on the road to the minimum stopping distance during braking, and it also impacts fuel consumption and tire wear. To find out the correct pressure for your tires, look for a label on the door edge or pillar that lists the pressure values based on tire size and vehicle load conditions, distinguishing between the front and rear axles.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A4 (2007-2016 / B8) In today's video, we will see how to reset the tire pressure warning light on an Audi A4, model B8 equipped with a onboard computer. Before performin…
Audi A4 (2007-2016 / B8) Before carrying out the reset procedure, check the condition of the tires and their pressure using a pressure gauge. If everything seems to be OK but…
Audi A4 (2014-2024 / B9) Resetting the tire pressure indicator in the Audi A4, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, …

    Frequently Asked Questions

    • A4 2004-2008 - What causes the Audi A4 window regulator problem? Read answer
    • A4 2007-2016 - Where is the USB port of the Audi A4? Read answer
    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer
    • A4 2007-2016 - Where is the Audi A4 fuel pump relay located? Read answer

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos