Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Audi A3 service light?

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Service warning light

To be able to reset the Audi A3 Service warning light, you need to go and turn on the instrument panel and move within the menu on its display by turning the small button to the right. When the km missing to the next coupon appears, you will need to hold down the same button for a few seconds, until the maintenance screen disappears from the instrument panel. Therefore, once this operation has been completed, the instrument panel must be switched off; turning it on again it will be possible to see that the Service warning light has been reset correctly.

Posted on 22 January 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a 2016 Audi A3
How to reset the service light on a 2016 Audi A3
Audi A3 (2012-2019 / MK 3, 8V) Today we will explain how to reset the 2016 Audi A3 on your own. To reset the warning light, we turn on the instrument panel and the onboard computer…
How to reset the service light on the Audi A3
How to reset the service light on the Audi A3
Audi A3 (2012-2019 / MK 3, 8V) Today we will explain how to reset the service light on an Audi A3 vehicle independently. The reset should be done only after performing the operatio…
How to reset the service indicator light on the 2022 Audi A3
How to reset the service indicator light on the 2022 Audi A3
Audi A3 (2020-2026 / 8Y, MK 4) In the following article, we will see how to reset the maintenance service light of the 2022 Audi A3. To reset this light, first start the instrument…

How to Replace the Timing Belt on the BMW X3

Unlatch and lift the hood, then you will need to remove all the parts above the area where you will be working. As shown in the video, you can remove the screws to take off the upper panels. Now you need to remove the air filter cover from the engine. In any case, you will need to remove all obstructing parts until you reach the belt. In the diagram, you can see which pulley acts as the tensioner, so loosen it to remove the belt. Once the tension is off the belt, you can take it out and replace it without issues. Retrace the steps in reverse for reassembly of the various components.

Watch the video!


by ScegliAuto

More videos