Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Mini Headlamp Washers

Model: Mini Mini R56, R57, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

Video tutorial

To remove and replace the headlamp washers on a Mini, proceed as follows: 1) Open the engine bay. 2) Disconnect the battery. 3) Remove the four bolts securing the headlamp to the car's frame, taking care of the different lengths of the bolts. 4) Gently lift the headlamp unit, remembering to disconnect the electrical connection and the rubber hose of the washer. 5) Remove and replace the washer using the two screws from the headlamp unit. 6) To reinstall the components, proceed in reverse, ensuring the correct positioning of all screws and electrical/hydraulic connections.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp from a Mini Cooper
Mini (2007-2014 / R56, R57, R55) Before starting, open the front bonnet of your Mini Cooper. Begin by unscrewing and removing the bolts that secure the front headlamp to the vehicle.…
How to Remove the Rear Headlamp from the Mini Cooper R56
How to Remove the Rear Headlamp from the Mini Cooper R56
Mini (2007-2014 / R56, R57, R55) If you need to remove one of the rear headlamps from your Mini Cooper R56 but don't know how, don't worry as we will explain step by step how to comp…
How to Remove the Rear Headlamp on a Mini Countryman
How to Remove the Rear Headlamp on a Mini Countryman
Mini (2014-2023 / F56, F54, F57, F55) Let's see how to remove the rear headlamp on a Mini Countryman: open the boot of the car; remove the plastic grille on the side panel of the boot, th…

How to Adjust the Handbrake on the Kia Sportage 3

Adjusting the handbrake on the Kia Sportage 3 is a straightforward task, but for safety reasons, it is advisable to have it done by a qualified mechanic. First, remove the rear part of the central dashboard using a plastic lever; as this part is clipped in, it should not be difficult to remove. Next, take a socket spanner and insert it into the bolt located at the centre, near the floor of the car. This will allow you to adjust the tension of the handbrake. Meanwhile, lift the handbrake to check the correct tension.

Watch the video!


by ScegliAuto

More videos