Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A1
    4. : Where is the fuse box on the Audi A1

Audi A1 - Video tutorial

Model: Audi A1 MK 1, 8X - Years 2010-2018
Part: Fuse box
Operation: Where is the fuse box on the Audi A1

If you have a first series Audi A1 (year 2010-2018) and you need to locate the fuse box then all you have to do is read our new guide carefully and put what is described into practice. First of all you need to park your vehicle safely and turn it off completely for safety reasons. Once that's done, lift the front hood and shift your attention to the upper right side. At this point, locate the box you were looking for and remove the protective cover present to have access to all the various fuses.


Posted on 23 May 2023 by ScegliAuto



What is the fuse diagram for the Audi A1?
Audi A1 (2018-2024 / MK 2, GB) In this video, we can see the fuse layout of the Audi A1 and the location of the various fuse boxes, which can be useful in case we need to check the
Fuse box layout and positioning of the Audi A1.
Audi A1 (2018-2024 / MK 2, GB) Today we discover the guide on how to identify the fuse scheme and diagram of the Audi A1, following the instructions below. First, we open the front
Fuse box of an Audi A1
Audi A1 (2010-2018 / MK 1, 8X) We can see thanks to this very short video guide today the location of the fuse boxes inside our first-generation Audi A1, a model produced from 2010

    Frequently Asked Questions

    • Audi A1 2010-2018 - Where is the fuse box located in the Audi A1? Read Answer
    • Audi A1 2010-2018 - What is the fuse for the horn on the Audi A1? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos