Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Audi A4?

Model: Audi A4 B7 - Years 2004-2008
Part: Service warning light

Video tutorial
Detailed instructions - Resetting the service light on an Audi A4, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, make sure you have completed all required scheduled maintenance tasks. Start by entering the cabin, then insert the key but leave it in the initial position. Next, press and hold the button that looks like a wrench, located just below the speedometer, while simultaneously turning on the ignition. At this point, release the button and quickly press the "0.0" button located to its right. Then restart the vehicle and check that the reset was successful.

Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to reset the "Service" indicator on an Audi A4?
How to reset the "Service" indicator on an Audi A4?
Audi A4 (2004-2008 / B7) Good morning, today we will focus on the important procedure of resetting the "Service" light on our Audi A4. Before proceeding, make sure you have p…
How to Reset the Service Light on an Audi A4?
How to Reset the Service Light on an Audi A4?
Audi A4 (2007-2016 / B8) .. In this tutorial, you will see how to reset the service light on an Audi A4 B8. This operation is extremely simple and quick, and should.. …
How to reset the service light on the 2018 Audi A4
How to reset the service light on the 2018 Audi A4
Audi A4 (2014-2024 / B9) The reset of the service light of the 2018 Audi A4 must be performed after replacing the engine oil, checking the fluids in the tanks, checking the t…

Where to Find the Fuses in the Nissan Qashqai

The fuse box in the Nissan Qashqai's cabin is located to the left of the steering wheel, where there is a small cover. Pull it off to access the fuse and relay box. To replace a fuse, if that is the cause of the issue, take a small pair of pliers and remove the fuse of the non-functioning component. Check that the bridge inside the fuse is not broken; if it is broken, replace the fuse with a new one of the same amperage as the old one. If the bridge is intact, the fuse is functioning correctly.

Watch the video!


by ScegliAuto

More videos