Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Audi A3 8L service light

Model: Audi A3 8L, MK 1 - Years 1996-2003
Part: Service warning light

In this new guide dedicated to all of you owners of an Audi A3 8l (year 1996-2003) we're going to find out how to reset the service warning light if it continues to come on even though the vehicle has been regularly serviced. First, get into the car and get to the driver's seat. Immediately after, make sure that the ignition is off and hold down the button located under the speedometer. Then turn on the ignition and after a few seconds release the button and pull the one located below the rev counter towards you. Finally, repeat the same operation again and at the end of the reset switch off the ignition.

Posted on 28 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Audi A3 service light
How to reset the Audi A3 service light
Audi A3 (2012-2019 / 8V, MK 3) In today's video we see how to proceed to reset the service light in the Audi A3. First we proceed by carrying out the maintenance recommended by the…
How to reset the Audi A3 service light
How to reset the Audi A3 service light
Audi A3 (2020-2026 / MK 4, 8Y) If you want to permanently eliminate the service warning light from the instrument panel of your new Audi A3 then it will be enough for you to put in…
How to reset the service indicator of the Audi A3.
How to reset the service indicator of the Audi A3.
Audi A3 (2012-2019 / 8V, MK 3) If you own an Audi A3 (2012-2019) and want to learn how to manually reset the service indicator, then all you have to do is follow the steps describe…

Other guides you may be interested in

    Frequently Asked Questions

    • A3 2012-2019 - How to reset the service light on an Audi A3? Read answer

How to Remove the High-Pressure Fuel Pump on VW Golf

In this video, learn how to remove the high-pressure fuel pump on the Volkswagen Golf. Lift the bonnet and secure it, then remove the engine soundproofing panel. Using a screwdriver, unscrew the locking pins of the ventilation pipe and remove the piece from the engine bay. Start removing the fastening pins of the pump as shown in the video. Once the piece is detached from its seat, disconnect the clip present on it. Finally, refit the high-pressure fuel pump in the engine bay, along with the intake pipe and the soundproofing panel.

Watch the video!


by ScegliAuto

More videos