Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

From the instrument cluster of the Audi A3, you can completely clear the Service light by activating the instrument cluster, turning the appropriate key in the ignition switch, and then finding the maintenance option by turning the dial on the right side of the instrument cluster.

When this option is found, press and hold the same button for a few seconds until the mileage and days remaining until the next maintenance are reset.

This way, you can turn off and turn on the instrument cluster, verifying that the Service light has been cleared.


Posted on 3 March 2026 by ScegliAuto


Related tutorials

How to Reset the Key Battery Warning Light on Audi A3?
How to Reset the Key Battery Warning Light on Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) When the key battery warning light appears on the Audi A3 instrument panel, it means the battery needs to be replaced: replacing it will make the war…
How to Reset the Service Light on an Audi A3 MK4
How to Reset the Service Light on an Audi A3 MK4
Audi A3 (2020-2026 / MK 4, 8Y) Here we see how to reset the service light on an Audi A3 MK4 that uses the MIB3 multimedia system with a touchscreen. Turn on the instrument panel an…
How to Reset the Service Light on an Audi A3
How to Reset the Service Light on an Audi A3
Audi A3 (2020-2026 / MK 4, 8Y) To permanently remove the service light from the instrument cluster of your new Audi A3, follow the instructions below. First, enter the cabin and en…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos