Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Service warning light

If you own an Audi A3 (2012-2019) and want to learn how to manually reset the service light, follow the steps outlined in this guide. First, turn on the ignition and press the "Trip" button multiple times until "Trip A" appears on the display. Next, hold down the button you used previously and release it as soon as you enter the vehicle settings. Then, select the "Service interval" option and press the "Trip" button again to complete the reset of the light.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Audi A3
How to Reset the Service Light on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) To reset the service light on the Audi A3, first get in the vehicle and close all four doors. Turn on the ignition. You will see the service inspecti…
Resetting the Service Light on Audi A3 8P
Resetting the Service Light on Audi A3 8P
Audi A3 (2003-2013 / MK 2, 8P) In this brief tutorial, learn the procedure to reset the service light on an Audi A3, model 8P, produced from 2003 to 2013. Start by turning on the i…
How to Reset the Service Light on an Audi A3?
How to Reset the Service Light on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) The procedure to reset the Service light on an Audi A3 involves turning on the ignition by rotating the key in the ignition switch, then locating the…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos