Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear engine mount of the Audi A3?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Engine mount

In order to replace the rear engine mount of the Audi A3, the car must be lifted so that access to the components of the lower engine compartment can be obtained. Here it will be possible to locate the bolts that secure the rear engine mount: once these screws have been loosened, it will be possible to completely detach the mount, so that the new replacement piece can be inserted. The new mount must be properly secured with the corresponding screws; after installation, the engine must be started to ensure that it is stable.

Posted on 5 April 2023 by ScegliAuto

Video tutorial

Related tutorials

Engine Mount Replacement for Audi A3
Engine Mount Replacement for Audi A3
Audi A3 (2003-2013 / MK 2, 8P) One of the first symptoms of a failing engine mount is excessive engine vibration, especially during starting and stopping. Additionally, due to the …
How to replace the rear light bulb of an Audi A3.
How to replace the rear light bulb of an Audi A3.
Audi A3 (2003-2013 / MK 2, 8P) In this tutorial, we can see how to replace the rear light bulb of an Audi A3 car. Lift the trunk door, remove the plastic covers, and unscrew the co…
How to replace the bulbs in the interior lights of the Audi A3?
How to replace the bulbs in the interior lights of the Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) In order to replace the bulbs of the interior lights of the Audi A3 you have to use an object that acts as a lever to be able to detach the central c…

Other guides you may be interested in

How to Replace the Boot Compartment Light Bulb on a Peugeot 208

If you want to improve visibility inside the boot compartment, it is recommended to replace the original incandescent bulb with a LED type (T10 fitting); once the rear hatch is opened, locate the bulb holder positioned on the side, near the shock absorber dome, where the plastic grille is located. Then, lever the retaining tab to extract the bulb holder, disconnect the power connector, and remove the old bulb to replace it with the LED one; reconnect the power, check the correct operation of the bulb (if not, rotate it 180°), and reposition the bulb holder in its place.

Watch the video!


by ScegliAuto

More videos