Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb of an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Light bulb

See other generations:
Video tutorial

In this tutorial, you can see how to replace the rear light bulb of an Audi A3. Lift the boot lid, remove the plastic covers, and unscrew the internal nuts corresponding to the light to be disassembled. At this point, you can proceed to extract the light from its housing and then unscrew the nuts holding it to the plastic support.

Next, remove the old bulb and replace it with the new one. Reattach the support to the light and position the light back in its housing, then secure it by re-screwing the internal screws in the boot of the car.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in the Audi A3?
How to Replace the Remote Battery in the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) Replacing the remote battery in the Audi A3, as we can see in this tutorial, is an extremely simple and quick operation. For this, you will need a sm…
How to Remove Rear Headlight Bulbs on an Audi A3
How to Remove Rear Headlight Bulbs on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Replace the damaged bulbs in the rear headlight of an Audi A3. Open the boot lid and remove the cover cap from the frame. Unscrew the plastic retaini…
How to replace the gear knob of the Audi A3 8P
How to replace the gear knob of the Audi A3 8P
Audi A3 (2003-2013 / 8P, MK 2) In the following guide you will find the description of the few simple steps that you need to follow to replace the old gear knob inside the cockpit …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos