Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Rear Headlight Bulbs on an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

Replace the damaged bulbs in the rear headlight of an Audi A3. Open the boot lid and remove the cover cap from the frame. Unscrew the plastic retaining screw located at the side of the headlight (right side).

Disconnect the rear headlight from its housing and disconnect the power connectors; replace the damaged bulbs with new ones (same size and voltage). Reconnect the power connectors, refit the headlight, and screw in the plastic screw.

Test the correct operation of the bulbs fitted in the Audi A3.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlamp Bulb on an Audi A3
How to Replace the Rear Headlamp Bulb on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Before you begin, open the boot of your Audi A3. Start by unclipping and removing the internal cover of the rear headlamp fixing nut, which you will …
How to Replace the Rear Headlight Bulb on an Audi A3
How to Replace the Rear Headlight Bulb on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) How do you replace a rear headlight bulb on an Audi A3? Let's see how to proceed in this video. This is a very simple operation; open the boot and ca…
How to Remove the Rear Light of an Audi A3
How to Remove the Rear Light of an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) To remove the rear light of an Audi A3 model 8V, follow these steps: - open the boot; - remove the side cover; - unscrew the two Torx screws; - pull …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos