Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

See other generations:
Video tutorial

Before you begin, open the boot of your Audi A3. Start by unclipping and removing the internal cover of the rear headlamp fixing nut, which you will then need to unscrew and remove. Next, extract the headlamp and disconnect the corresponding electrical connector.

This will give you access to the bulb holder. Proceed by unscrewing and removing the screws that secure the bulb holder to the rear headlamp.

At this point, you will have access to the blown bulb, which you can unclip and remove, successfully completing the disassembly. To fit the new bulb and reassemble everything, repeat these instructions in reverse order, and you will have completed the replacement.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of an Audi A3
How to Remove the Rear Light of an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) To remove the rear light of an Audi A3 model 8V, follow these steps: - open the boot; - remove the side cover; - unscrew the two Torx screws; - pull …
How to Replace the Rear Headlamp Bulb on an Audi A3
How to Replace the Rear Headlamp Bulb on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Replacing the rear headlamp bulb on an Audi A3 is a very simple task that can be done independently. Start the replacement by opening the boot and re…
How to replace the rear headlight bulb of the Audi A3
How to replace the rear headlight bulb of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the rear headlight bulb of an Audi A3 MK2 model car. First, open the trunk of the car and then remove the side a…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos