Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob of the Audi A3 8P

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Shift knob

See other generations:
Video tutorial

In the following guide you will find the description of the few simple steps that you need to follow to replace the old gear knob inside the cockpit of your Audi A3 8p. First of all, get into the car and make sure it is turned off, then shift your attention to the gear lever and grip the knob.

Next, pull it forcefully upwards until it comes off completely.

Once you have done that, take a new gear knob that is perfectly compatible with your Audi A3 8p and install it correctly, and the procedure is successfully completed.


Posted on 4 June 2025 by ScegliAuto


Related tutorials

How to replace the gear knob of the Audi A3
How to replace the gear knob of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the knob of an Audi A3 model 8P car. To perform the replacement of the knob, we need to lift the gear shift boot…
How to Change the Gear Knob on an Audi A3
How to Change the Gear Knob on an Audi A3
Audi A3 (1996-2003 / MK 1, 8L) To change the gear knob on an Audi A3, start by removing the gaiter using a plastic wedge. Then, use a screwdriver to lever off the clip that holds t…
How to Replace the Gear Knob on an Audi A3?
How to Replace the Gear Knob on an Audi A3?
Audi A3 (1996-2003 / MK 1, 8L) To replace the gear knob on an Audi A3, detach the retaining clips located at the base of the gear gaiter so that it can be completely lifted. After …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos