Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Gear Knob on an Audi A3

Model: Audi A3 MK 1, 8L - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Shift knob

See other generations:
Video tutorial

To change the gear knob on an Audi A3, start by removing the gaiter using a plastic wedge. Then, use a screwdriver to lever off the clip that holds the knob in place.

Fit the new knob, using the original frame if the new knob doesn't fit properly. Insert and tighten the clip with pliers, then screw on the plastic cover for the clip.

Finally, lower the gear gaiter back into its position.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the knob of an Audi A3 model 8P car. To perform the replacement of the knob, we need to lift the gear shift boot…
Audi A3 (2003-2013 / 8P, MK 2) In the following guide you will find the description of the few simple steps that you need to follow to replace the old gear knob inside the cockpit …
Audi A3 (1996-2003 / MK 1, 8L) To replace the gear knob on an Audi A3, detach the retaining clips located at the base of the gear gaiter so that it can be completely lifted. After …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos