Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Compartment Light Bulb on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Interior dome light bulb

If you want to improve visibility inside the boot compartment, it is recommended to replace the original incandescent bulb with a LED type (T10 fitting); once the rear hatch is opened, locate the bulb holder positioned on the side, near the shock absorber dome, where the plastic grille is located. Then, lever the retaining tab to extract the bulb holder, disconnect the power connector, and remove the old bulb to replace it with the LED one; reconnect the power, check the correct operation of the bulb (if not, rotate it 180°), and reposition the bulb holder in its place.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Boot Light Bulb on Peugeot 208
Removing Boot Light Bulb on Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) In this video, you will see how to remove the boot light bulb from a Peugeot 208, but the procedure is similar or even identical on other Peugeot mod…
How to open the trunk of the Peugeot 208
How to open the trunk of the Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) The luggage compartment of a second generation Peugeot 208 car. It can be opened from inside the vehicle or from the outside. To open the trunk from …
How to Remove the Headlight Bulb of a Peugeot 208
How to Remove the Headlight Bulb of a Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) Before starting, open the bonnet of your Peugeot 208. Begin by unclipping and removing the rear cover of the bulb by simply pulling it outwards. Next…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos