Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Tail light bulb

In this guide, you will learn how to correctly replace the rear light bulb on your first-generation Peugeot 208 (2012-2019). Before starting, park the car safely and remember to turn it off completely for safety reasons. It is also advisable to disconnect the battery to perform the replacement without any risk. Once these precautions are taken, lift the rear hatch of the car and remove the cover located on the side of the boot. Disconnect the existing cable and proceed to remove the light unit. Finally, replace the old bulb with the new one.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Peugeot 208
How to replace the rear headlight bulb of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) To replace the rear headlight bulb of your first-generation Peugeot 208 by yourself, simply follow the procedure described in the following guide. Be…
How to replace the rear headlight bulb of the Peugeot 208
How to replace the rear headlight bulb of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) If you want to replace the rear headlight bulb of your first series Peugeot 208 by yourself, you must follow all the steps described in this new guid…
How to Remove the Rear Light of the Peugeot 208?
How to Remove the Rear Light of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial, see how to remove the rear light of the Peugeot 208, useful if you need to replace a bulb or the light itself. No special tools are…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos