Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

If you want to replace the rear headlight bulb of your first series Peugeot 208 by yourself, you must follow all the steps described in this new guide dedicated to you. First of all, lift the rear hood of the car and remove the protective grille located on the side of the trunk.

Then disconnect the electrical connector and unscrew the small safety cap by rotating it counterclockwise.

Once you have done this, go back outside and pull the rear headlight towards you until it is completely removed. Finally, remove the protective cover and proceed with the replacement of the bulb.


Posted on 1 February 2025 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Peugeot 208
How to replace the rear headlight bulb of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) To replace the rear headlight bulb of your first-generation Peugeot 208 by yourself, simply follow the procedure described in the following guide. Be…
How to Remove the Rear Light of the Peugeot 208?
How to Remove the Rear Light of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) In this tutorial, see how to remove the rear light of the Peugeot 208, useful if you need to replace a bulb or the light itself. No special tools are…
How to Replace the Front Headlamp Bulb on a Peugeot 208
How to Replace the Front Headlamp Bulb on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) These brief and simple steps will show you how to remove and replace the dipped beam bulb of the front headlamp on a Peugeot 208. First, open the bon…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos