Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on an Audi A3 S3 and RS3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

This guide shows how to remove the rear light on an Audi A3, both in S3 and RS3 versions. The first operation is to open the boot and remove the trim panel from the side of the light to be worked on. Inside the boot, there is a square plastic bolt at the top that needs to be unscrewed with a screwdriver.

Using a trim removal tool, pull the light out of its housing. At this point, disconnect the electrical connector and remove the indicator bulb holder.

Replace the faulty bulb and reassemble everything in position, checking its proper operation.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

Why does the engine shut-off function activate in the Audi RS3?
Why does the engine shut-off function activate in the Audi RS3?
Audi A3 (2020-2026 / MK 4, 8Y) The car presented in this video is an Audi RS3, which is the most powerful version of the Audi A3. Not only in this car, but also in other vehicles o…
How to reset the tire pressure light in the Audi RS3?
How to reset the tire pressure light in the Audi RS3?
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial we can see how to reset the tire pressure warning light in the Audi RS3, an extremely simple and quick operation, to be carried out …
How to reset the tyre warning light on the Audi RS3?
How to reset the tyre warning light on the Audi RS3?
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial, you will see how to reset the tyre warning light on the Audi RS3, a very simple and quick operation to perform only after restoring…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos