Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Fog Light

Model: Audi Q7 4L, MK 1 - Years 2006-2015
Part: Light bulb

The rear fog light is integrated into the bumper. To replace the bulb, you need to remove the light from its housing. First, remove the cap located just below the light and unscrew the corresponding fastening screw, using a magnet to catch the screw. Once the fog light is removed from its housing, disconnect the power connector and detach the bulb holder to replace the bulbs (bayonet fitting). It is recommended to replace both bulbs due to their low cost, especially since the light is already disassembled. Proceed in reverse order for reassembly.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Stabilizer Bar Bushing Replacement
Stabilizer Bar Bushing Replacement
Audi Q7 (2006-2015 / 4L, MK 1) It is quite common for the support bushings of the stabilizer bar to break, but their replacement is very simple and economical; lift the vehicle on …
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Audi Q7 (2006-2015 / 4L, MK 1) This video tutorial shows all the steps to replace the old cabin air filter in an Audi Q7 4L. The filter is located under the glove compartment on th…
Rear Suspension Control Arm Replacement
Rear Suspension Control Arm Replacement
Audi Q7 (2006-2015 / 4L, MK 1) Replacing the rear suspension control arm is very simple since there is enough maneuvering space and no other components need to be removed. Lift the…

How to Replace the Timing Belt on a Peugeot 206

First, release the bonnet from the lever and lift it. Access to the belt is easier from the front right wheel, so remove it. Now disconnect the battery cables. Once the wheel is completely removed, you will also need to remove the brake to work from underneath your vehicle. Unscrew the tensioner and the lower pulley cover, allowing you to comfortably extract the new belt in position. Now simply retrace the steps described above to reassemble the various components.

Watch the video!


by ScegliAuto

More videos