Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the fuel door that is stuck on the Audi A4?

Model: Audi A4 B9 - Years 2014-2024
Part: Fuel cap

In the Audi A4, it can happen that the fuel door gets stuck, for example due to a malfunction in the control or the actuator. In these cases, it is possible to perform the emergency opening of the door by following the simple procedure shown in this tutorial. First of all, we open the trunk door, then we remove the panel located in the right wall of the compartment. We then locate the red cord, grab it and pull it towards us, thus unlocking the lock. At this point, it will be possible to both refuel and repair the damaged element.

Posted on 8 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to open the fuel door that is locked in the Audi A4?
How to open the fuel door that is locked in the Audi A4?
Audi A4 (2004-2008 / B7) In the Audi A4, it may happen that the fuel door gets stuck, for example due to a malfunction in the actuator or the control located in the cabin. In…
How to open the fuel door locked in the Audi A4?
How to open the fuel door locked in the Audi A4?
Audi A4 (2007-2016 / B8) In the Audi A4, it can happen that the fuel door gets stuck, for example due to a malfunction in the control button or lock actuator. In these cases,…
How to remove the electric fuel filler flap lock on the Audi A4 - A5
How to remove the electric fuel filler flap lock on the Audi A4 - A5
Audi A4 (2007-2016 / B8) In this guide, let's take a look at the instructions that will allow us to disassemble and replace the fuel flap closure on the Audi A4, but also on …

How to Replace the Rear Wheel Bearing on Peugeot 407

How to remove a rear wheel bearing along with all associated parts on a Peugeot 407? Position your car on a column lift, loosen the bolts with a socket wrench and raise it to a comfortable height. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a socket to loosen the caliper bolt. Now remove the caliper bracket and unscrew the bolts on the brake disc, pulling the disc towards you to slide it off the wheel hub. Completely remove the wheel hub from the car's arm and extract the worn bearing. Using a pressing tool, fit the new bearing. Before reassembling everything, clean all dirt and debris from the disassembled parts with brushes and lubricate the components. Refit the brake disc with all associated bolts.

Watch the video!


by ScegliAuto

More videos