Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Audi A1?

Model: Audi A1 MK 2, GB - Years 2018-2025
Part: Service warning light

Resetting the service light on an Audi A1, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that you have completed all required scheduled maintenance tasks. Start by entering the cabin, then turn on the ignition and, using the "Home" button, navigate to the main display screen. Next, go to "CAR", then "Settings & service" and select "Service intervals". At this point, you can confirm the reset and check that the operation was successful by restarting the vehicle.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Audi A1
How to Reset the Service Light on Audi A1
Audi A1 (2010-2018 / 8X, MK 1) In today's tutorial, you will learn how to reset the service light for routine maintenance on an Audi A1. First, get inside the vehicle and reset the…
How to Reset the Service Light in the Audi A1?
How to Reset the Service Light in the Audi A1?
Audi A1 (2018-2025 / MK 2, GB) In this tutorial, we will see how to reset the service light in the Audi A1, a very simple and quick operation to perform only after completing all s…
How to Reset the Service Light on an Audi A1?
How to Reset the Service Light on an Audi A1?
Audi A1 (2010-2018 / 8X, MK 1) .. This tutorial shows how to reset the service light on an Audi A1, a very simple and quick operation to perform only after.. …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos