Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the rear windshield wiper arm in the Audi A3?

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Windshield wipers

As we can see in this tutorial, disassembling the rear windshield wiper arm in the Audi A3 is an extremely simple and quick operation. First of all, make sure that the wiper arm is in the resting position. If not, activate and deactivate it as soon as it reaches this position. Then, remove both the base cover and the fixing nut cap. Once this is done, unscrew the nut with a 13mm socket wrench. The nut may be stuck due to dirt, in which case we can apply some loosening spray. To install the replacement, simply follow the reverse procedure.

Posted on 25 August 2023 by ScegliAuto

Video tutorial

Related tutorials

Rear wiper replacement on Audi A3
Rear wiper replacement on Audi A3
Audi A3 (2012-2019 / MK 3, 8V) Raise the rear wiper arm, bend the blade slightly with respect to the arm and pull it out firmly from it. In the same way, to assemble the new brush …
Replacement of the rear windshield wiper motor of the Audi A3
Replacement of the rear windshield wiper motor of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today we will see step by step instructions on how to disassemble and replace the rear windshield wiper motor of the Audi A3. First, open the rear ha…
Removing the rear wiper motor on the Audi A3 8P
Removing the rear wiper motor on the Audi A3 8P
Audi A3 (2003-2013 / 8P, MK 2) Let's see in this short video how to disassemble and replace the rear wiper motor on the Audi A3 8P, following these simple steps. Let's start immedi…

How to Remove the Engine Air Filter on an Opel Astra Station Wagon

How do you remove the engine air filter on an Opel Astra Station Wagon? Follow this guide for the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Use a screwdriver to remove the retaining bolt of the air intake hose clamp and the retaining bolts of the container box where the filter is located. Remove the dirty air filter and position a new one, ensuring it fits snugly against the walls of the box. Finally, refit the air box cover and tighten the screws.

Watch the video!


by ScegliAuto

More videos