Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windshield of an Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Windshield

See other generations:
Video tutorial

Today's video will show you how to remove and replace the windshield of an Audi A4, following the instructions below. First, open the hood of the vehicle and start removing the side seal of the windshield using a thin plastic pry tool.

Then, use a metal wire and special suction cup tools to detach and remove it, as shown in the video. At this point, clean the base of the windshield thoroughly, then apply adhesive silicone and set the new windshield in place; finally, install the seal!


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Remove the Interior Rearview Mirror of an Audi A4
How to Remove the Interior Rearview Mirror of an Audi A4
Audi A4 (2004-2008 / B7) How do you remove the interior rearview mirror located in the cabin of an Audi A4? Follow the removal process in the video: enter the vehicle, grasp …
How to Replace the Cabin Air Filter on an Audi A4
How to Replace the Cabin Air Filter on an Audi A4
Audi A4 (2000-2004 / B6) In this video tutorial, you can see how to replace the cabin air filter on an Audi A4 by following a few simple steps: the first thing you need to do…
Where is the battery located in the Audi A4?
Where is the battery located in the Audi A4?
Audi A4 (2007-2016 / B8) As shown in this video, the battery in the Audi A4 B8 is located in the engine compartment, centrally positioned right in front of the windshield. To…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos