Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to replace the window regulator motor in an Audi A3 8P.

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Window motor
Operation: How to replace the window regulator motor in an Audi A3 8P.

In this video tutorial, we can see how it is possible to replace the window regulator motor in an Audi A3 8P: open the door and remove the plastic, where underneath we will find the screws to remove the panel; remove all the T27 torx screws from the panel and then pull forcefully from one side and then the other, lift the panel because it is interlocked. Once the panel is detached, we need to remove the handle plugs by releasing them; remove the second panel which is also interlocked, (remove the rubber and pull out the handle cable). Remove the window regulator motor with a T30 key; unscrew the screws holding the internal pillars. Disconnect the cables going to the motor. Once all the screws have been removed as shown in the video, we can remove the window regulator motor (press the motor support otherwise it won't come out). Replace the old motor with a new one and reassemble all the parts by proceeding in reverse.


Posted on 2 September 2023 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos