Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on an Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part:

In this tutorial, you will see how to reset the tyre warning light on an Audi A3, a very simple and quick operation. Before proceeding, ensure you have restored the correct pressure in each tyre according to the instructions in the manual. Start by entering the cabin, then turn on the instrument panel and press the "MENU" button on the central console. Next, navigate to the "CAR" section, move to the "Systems" tab, enter "Service & Control", "Tyre Pressure Control", and perform the reset by selecting "Store Tyre Pressures".

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Crankshaft Sensor on an Audi A3
How to Replace the Crankshaft Sensor on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) To replace the crankshaft sensor on the Audi A3, lift the car with a ramp to access the underside. The sensor is located near the engine compartment …
Where is the Turbo Pressure Sensor Located in the Audi A3?
Where is the Turbo Pressure Sensor Located in the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In the Audi A3 8V, the turbo exhaust gas pressure sensor is located inside the engine bay on the driver's side. As seen in the attached video, to acc…
How to Reset the "Tyre Pressure" Light on an Audi A3
How to Reset the "Tyre Pressure" Light on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Before starting, sit in the driver's seat of your Audi A3 and activate the instrument panel by turning the key to the first position. Next, select th…

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos