Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Suspension Arm

Model: Audi Q7 MK 1, 4L - Years 2006-2015
Part: Control arm

A worn suspension arm must be replaced to avoid a dangerous loss of vehicle control. It is not a very complicated job and can be done alone, without the help of a mechanic. The arm connects the frame to the struts. First, lift the car, remove the hubcap, and unscrew all the bolts. Without making sudden movements, detach the stabilizer link using two 14mm wrenches. You can then extract it. After removing the joint, the arm will be in front of you, secured with screws that need to be removed.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear Suspension Control Arm Replacement
Rear Suspension Control Arm Replacement
Audi Q7 (2006-2015 / MK 1, 4L) Replacing the rear suspension control arm is very simple since there is enough maneuvering space and no other components need to be removed. Lift the…
Stabilizer Bar Bushing Replacement
Stabilizer Bar Bushing Replacement
Audi Q7 (2006-2015 / MK 1, 4L) It is quite common for the support bushings of the stabilizer bar to break, but their replacement is very simple and economical; lift the vehicle on …
How to Replace the Upper Control Arm on Rear Wheels with Independent Suspension
How to Replace the Upper Control Arm on Rear Wheels with Independent Suspension
Audi Q7 (2006-2015 / MK 1, 4L) Place the car on a lift and raise it to the ideal height for working on the wheels. Remove the rear wheel. Locate the upper control arm and, using th…

How to Remove the Rear Wiper Blade on a Citroen C3

This guide shows you how to remove and replace the rear wiper blade on a Citroen C3. Grasp the rear wiper blade with your hands, gently pull the rubber from the moving blade (without breaking it), and slide it off the arm on the left. Fit the new wiper rubber onto the arm (if the rubber is original, you may need to adjust the length by cutting it as shown). Finally, lower the wiper arm onto the rear window and test the new blade by activating the rear wiper. It is always preferable to use original parts for better durability and quality.

Watch the video!


by ScegliAuto

More videos