Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Vents in the Audi A3?

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Air vents

See other generations:
Video tutorial

In this tutorial, you will see how to remove the air vents in the Audi A3, a very simple and quick operation. First, go inside the cabin, then using a flat-head screwdriver or preferably a plastic spatula to avoid leaving any marks, pry along the perimeter of the first vent until you dislodge it. Remove it from the housing, repeat the operation for the opposite vent, and install any replacements by following the reverse procedure.

You can also replace the side vents in the same way.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Remove the Air Vents on an Audi A3
How to Remove the Air Vents on an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Learn how to remove the air vents (side dashboard) on an Audi A3. Use multiple levers to remove the vents. Pry at the top and bottom with the levers …
How to Remove the Air Vents of an Audi A3
How to Remove the Air Vents of an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Before you can begin, sit in the driver's seat of your Audi A3. Start by unfastening the internal clips that secure the air vents to the centre conso…
Disassembly of the ventilation nozzles of the Audi A3
Disassembly of the ventilation nozzles of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Below we will see the main instructions that will allow us to disassemble the ventilation nozzles or air diffusers of the dashboard of the Audi A3. F…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos